Head to head
Qure Q-Rejuvalight Pro vs Omnilux Contour Face
You cannot compare two devices when one of them publishes nothing to compare. Here is what we could establish, and what that absence should tell you.
By Selena H. · Published October 13, 2026

Illustrative photograph, not a picture of a specific device.
Disclosure: Glow & Current earns a commission when you buy through links on this page, at no extra cost to you. It does not change which device wins or what we say about it — here is exactly how we are funded, and here is how we evaluate devices.
Some comparisons end quickly, and this is one of them. We went looking for the Qure's published specifications and the FDA record behind its clearance claim. We found a product page with marketing copy and a database that returned nothing.
Quick picks
The short answer
| # | Product | Best for | FDA clearance | Price |
|---|---|---|---|---|
| 1 | ![]() Omnilux Contour Face The one with numbers | any buyer who wants to evaluate before spending | Not located | |
| 2 | ![]() Qure Q-Rejuvalight Pro LED Mask Cannot be assessed | nobody, on current information | Not located |
Prices are checked live and stamped with the date they were read. No live price is held for these listings right now, so every button reads “Check price on Amazon” rather than showing a number we cannot stand behind. Last price check: October 13, 2026.
The method
What we searched for
- The FDA 510(k) database, by device name and by brand as applicant. No record returned for Qure.
- A wavelength list in nanometers. The product is marketed on multiple selectable colors; we could not verify a specific nanometer list.
- An irradiance figure. None published.
- A diode count. None we could verify.
Specifications
The Omnilux side, for completeness
| Omnilux Contour Face | Qure Q-Rejuvalight Pro | |
|---|---|---|
| Wavelengths | 633 nm, 830 nm | Not verified |
| Diodes | 132 | Not verified |
| Irradiance | ~30 mW/cm2 brand-stated | Not published |
| Shell | Flexible silicone | Rigid |
| 510(k) located | No | No |
We are not holding the Omnilux up as flawless here. Its clearance record is the weakest part of an otherwise strong product, and we say so on every page that mentions it. But it publishes two wavelengths, a diode count and an irradiance. That is three facts you can hold the company to, against zero.
How to shop this category
A general rule this comparison illustrates
In a category where almost nobody publishes irradiance, the brands that publish anything at all are signaling something. Publishing a number means being wrong in public if the number is wrong. A brand that publishes only adjectives has chosen never to be checkable.
That is not a hard rule and it is not a moral judgment. It is a practical filter that happens to be the only one available to a buyer in this market.
In detail
Every pick, and why
The one with numbers
Omnilux Contour Face
Omnilux · Best for any buyer who wants to evaluate before spending
633 and 830 nm, 132 diodes, ~30 mW/cm2 brand-stated. We could not locate a clearance, and we hold that against it, but there is a specification here to argue with.
A flexible silicone full-face mask running two wavelengths, red and near-infrared, with the highest published irradiance figure of any mainstream consumer mask.
Specifications
| Wavelengths | 633 nm red, 830 nm near-infrared |
|---|---|
| LEDs | 132 (66 red, 66 near-infrared) across 66 dual-chip bulbs |
| Irradiance | ~30 mW/cm2, brand-stated, not independently verified |
| Protocol | 3-5 sessions a week for 4-6 weeks, then maintenance |
| Warranty | Not published on the product page |
FDA clearance not located
Omnilux states FDA clearance for the Contour Face. We could not locate a 510(k) record under that device name in the public FDA database. The wrinkle-reduction clearance on file for the brand is K072459 (Omnilux New-U, March 2008).
What works
- Publishes an irradiance figure at all, which most of this category does not
- Two clinically studied wavelengths with no filler colors padding the spec sheet
- Flexible silicone sits flat against the cheekbones and jaw
What does not
- No blue light, so it is the wrong mask if acne is your main concern
- No 1072 nm, which is the one axis where the CurrentBody masks go further
- Warranty length is not published where buyers can find it
Specifications from Omnilux product page, checked 13 October 2026.
Cannot be assessed
Qure Q-Rejuvalight Pro LED Mask
Qure · Best for nobody, on current information
No verified nanometer list, no published irradiance, no located 510(k). We are not saying it does not work. We are saying there is nothing published that would let anyone determine whether it does.
A multi-wavelength rigid mask positioned below the flagship tier.
Specifications
| Wavelengths | Multi-wavelength; the manufacturer does not publish a verified nm list we could confirm |
|---|---|
| Irradiance | Not published |
| Clearance | None located |
FDA clearance not located
No 510(k) record located under the Qure brand or device name in the public FDA database.
What works
- Sits below the flagship tier on price
- Multiple selectable colors
- Lightweight
What does not
- No located clearance
- No verifiable wavelength or irradiance publication
- Hard to recommend over a mask whose clearance we can cite
Specifications from FDA 510(k) database query, device_name:qure, 13 October 2026, checked 13 October 2026.
If the Qure's specifications exist somewhere we did not look, send them to us and we will rewrite this page. The offer is genuine and it stands indefinitely.
FAQ
Questions people actually ask
Is the Qure LED mask FDA cleared?
What wavelengths does the Qure mask use?
Should I avoid masks with no published specifications?
What should I buy instead?
Sources
Where this page’s facts come from
Read next
Keep going
- JOVS 4D mask vs Omnilux Contour Face
Laser-diode marketing against a published irradiance figure, with neither brand holding a locatable mask clearance.
- LED masks with a clearance number you can actually look up
Every LED mask with a located 510(k), listed with its number, clearance date and product code - plus the ones that returned nothing.
- Omnilux Contour Face review
The only mainstream LED mask that publishes an irradiance figure, reviewed alongside the clearance record we could not find.
- Cheaper LED masks: what disappears from the spec sheet first
The cheaper end of the LED mask market, judged on which specifications and clearances survive the price cut.
- Irradiance and dose: the specification that decides everything
What mW/cm2 means, how dose is calculated, and why almost no mask manufacturer will publish the figure.

