Skip to content
Glow & Current

Device review

Omnilux Contour Face review

The one mainstream mask that tells you how much light it emits, and the one whose FDA clearance claim we could not verify. Both facts belong in the same review.

By Selena H. · Published October 13, 2026

Soft, warm light falling across skin - an illustrative image for the LED and red light mask section

Illustrative photograph, not a picture of a specific device.

Quick picks

The short answer

#ProductBest forFDA clearancePrice
1
Soft, warm light falling across skin - an illustrative image for the LED and red light mask section. Illustrative only - not a photograph of this model.

Omnilux Contour Face

Best published irradiance in the category

lines and texture, with a number to work fromNot located

Prices are checked live and stamped with the date they were read. No live price is held for these listings right now, so every button reads “Check price on Amazon” rather than showing a number we cannot stand behind. Last price check: October 13, 2026.

Specification

What you actually get

A flexible silicone mask carrying 132 LEDs - 66 red at 633 nm and 66 near-infrared at 830 nm, arranged as 66 dual-chip bulbs. Omnilux states irradiance of roughly 30 mW/cm2, and the protocol is three to five sessions a week for four to six weeks, then maintenance.

That is a deliberately narrow specification. No blue, no green, no yellow, no 1072 nm. Omnilux sells separate devices for acne (the Clear) and for the neck. The Contour Face does one thing.

Output

The irradiance figure, and why it is the headline

We have written this on several pages and it bears repeating here: CurrentBody, Therabody, Shark and Dr. Dennis Gross publish no irradiance figure for their masks. Omnilux publishes ~30 mW/cm2. That single difference is why this device keeps appearing near the top of our rankings despite its regulatory problem.

Dose is irradiance multiplied by time. With a figure you can reason: at 30 mW/cm2, a ten-minute session delivers a calculable energy density. Without one, a mask's diode count and session length are two facts that do not combine into anything. The full explanation is here.

The caveat is real and we will not bury it. The figure is brand-stated and has not been independently verified, by us or, as far as we can find, by anyone. We are crediting Omnilux for being checkable, not for having been checked.

Regulation

The clearance problem

Omnilux states FDA clearance for the Contour Face. We searched the public 510(k) database by device name, by the Omnilux brand, and by Globalmed Technologies and Photo Therapeutics as applicants. Nothing returned under Contour.

What does exist for the brand: K072459, Omnilux New-U, cleared 3 March 2008 under product code OHS; K210948, Omnilux CLEAR, cleared 24 June 2021 under the acne code OLP; and several older Photo Therapeutics records from 2003 to 2009.

Living with it

Fit and daily use

The flexible silicone is the second-best thing about this mask after the published figure. It drapes over the cheekbones and the sides of the nose rather than bridging them, which matters because irradiance falls off with distance and those are exactly the areas people want treated.

It is light enough to move around in, rolls up for a drawer, and the eye cut-outs sit where they should on most faces. The controller is a separate unit on a cable, which is the usual arrangement and the usual mild annoyance.

Limits

What it does not do

  • No blue light. If acne is your concern this is the wrong Omnilux; the Clear holds a located acne clearance.
  • No 1072 nm. Omnilux puts that wavelength in the Men model only, which is the only genuine specification difference in that product.
  • No neck coverage. A separate panel, and a separate purchase.
  • No published session length on the product page, which is a genuine gap on a device where dose is time-dependent.
  • No published warranty length either, which at this price is not good enough from any brand.

In detail

Every pick, and why

Soft, warm light falling across skin - an illustrative image for the LED and red light mask section. Illustrative only - not a photograph of this model.

Illustrative photograph. Not a picture of this model.

Best published irradiance in the category

Omnilux Contour Face

Omnilux · Best for lines and texture, with a number to work from

Two wavelengths, 132 diodes, a stated ~30 mW/cm2 and a flexible silicone shell that actually lies flat. The spec sheet is the most informative in the category and the regulatory position is the weakest of the major brands. You are buying a known output from a company whose clearance you cannot look up.

A flexible silicone full-face mask running two wavelengths, red and near-infrared, with the highest published irradiance figure of any mainstream consumer mask.

Specifications

Wavelengths633 nm red, 830 nm near-infrared
LEDs132 (66 red, 66 near-infrared) across 66 dual-chip bulbs
Irradiance~30 mW/cm2, brand-stated, not independently verified
Protocol3-5 sessions a week for 4-6 weeks, then maintenance
WarrantyNot published on the product page

FDA clearance not located

Omnilux states FDA clearance for the Contour Face. We could not locate a 510(k) record under that device name in the public FDA database. The wrinkle-reduction clearance on file for the brand is K072459 (Omnilux New-U, March 2008).

What works

  • Publishes an irradiance figure at all, which most of this category does not
  • Two clinically studied wavelengths with no filler colors padding the spec sheet
  • Flexible silicone sits flat against the cheekbones and jaw

What does not

  • No blue light, so it is the wrong mask if acne is your main concern
  • No 1072 nm, which is the one axis where the CurrentBody masks go further
  • Warranty length is not published where buyers can find it

Specifications from Omnilux product page, checked 13 October 2026.

Honest counter-case

Who should skip it

  • Anyone whose main concern is acne. Two wavelengths, neither of them blue.
  • Anyone who needs to verify the clearance. The record is not there to be found.
  • Anyone who already owns a working red and near-infrared mask. There is no upgrade here, only a different brand of the same two wavelengths.
  • Anyone who wants one device for face and neck. That does not exist in this category, from anyone.

FAQ

Questions people actually ask

Is the Omnilux Contour Face worth it?
If you want a mask with a published irradiance figure, it is currently the only mainstream option, and ~30 mW/cm2 across 633 and 830 nm is a reasonable specification. If a verifiable FDA clearance matters more to you, the CurrentBody Series 2 is the better buy.
How many LEDs does the Omnilux Contour Face have?
132: 66 red at 633 nm and 66 near-infrared at 830 nm, arranged across 66 dual-chip bulbs.
Is the Omnilux Contour Face FDA cleared?
Omnilux states that it is. We searched the public 510(k) database by device name, brand and applicant and could not locate a record under the Contour Face name. The brand's wrinkle-reduction record on file is K072459 from 2008.
How often should you use the Omnilux Contour Face?
Omnilux specifies three to five times a week for four to six weeks, then maintenance treatments as desired. The company does not publish a session length on the product page.

Sources

Where this page’s facts come from

Read next